For your 2006 Land Rover LR3 I recommend the K-Source towing mirror set # KS3990. These mirrors will fit around factory side mirrors that have a lip or gap between the glass and mirror housing. I checked some images of your make and model vehicle and it does have the compatible type of side mirrors from what I could see. I have included a link to a video review of these mirrors for you. view full answer...
We have universal tow mirror options that will work great on your 2005 Land Rover LR3 SE like the K-Source Tow Mirrors part # KS3891-2 but we do not have any custom fit mirrors like what you mentioned that fit your vehicle. The ones you mentioned were designed for Ram trucks actually. view full answer...
It is a good idea to install a brake controller on your 2005 Land Rover LR3 when towing your camper. With a brake controller installed, it can eliminate the push-pull action you can experience when towing a trailer or camper.
I recommend the Tekonsha Prodigy P2 Brake Controller, part # 90885. This is a proportional controller that activates the brakes on your camper in direct proportion to the braking action of your LR3. This results in less wear and tear on both your LR3 and the camper... view full answer...
We have a few options to carry 4 bikes on your 2007 Land Rover LR3, but we do not carry any trunk mounted bike racks that can carry more than 3 bikes.
One option for you is to carry three bikes on a trunk mounted bike rack like the Thule OutWay 3 Bike Rack, # TH56BV, and one bike on the roof of your vehicle. The Thule UpRide Bike Rack, # TH599000, fits most factory crossbars and it is a quality bike rack.
The other option that could save you money would be to use a hitch mounted bike... view full answer...
We have one hitch that is a fit for your 2006 Land Rover LR3 and it will work great for towing a small trailer, but it doesn't allow you to keep the spare mounted under the rear of the vehicle. For that you would want the Curt Hitch part # 13456.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,... view full answer...
The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit. view full answer...
Yes, the Thule Tire Chains XG12 part # TH2004705265 that you referenced are a confirmed fit for the tire size 255/55-19 that you have on your 2008 Land Rover LR3.
You will still want to check the owners manual of your vehicle for any tire chain restrictions. view full answer...
We have bike racks that are rated for carrying the weight of your e-bikes, but the Swagman Titan 2-Bike Rack # S63400 does not have enough capacity for that. None of the hanging style racks like this have the capacity so you'd need to look into a platform rack like the Saris Freedom 2 Bike Platform Rack # SA4412B which has a 60 lb per bike capacity and would work well for you. Platform racks hold the bikes a bit more securely too.
I attached a review video for this rack for you to check... view full answer...
I have a way to install a 7-way on your 2006 Land Rover LR3 but the Hopkins kit you mentioned is for trucks towing fifth wheel trailers so it would not be the correct kit.
You will need to start with a 4-way (if you do not have one). For that you would want the # C59496.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake... view full answer...
In order to find the correct weight distribution system, you will need to know: 1) the tongue weight of the trailer when loaded and ready to tow and then add 2) the weight of anything loaded behind the rear axle of the tow vehicle.
Once you add these together to get the total tongue weight, you will want a system that has a tongue weight capacity range that puts your total tongue weight in the middle. So for a 600 to 1,200 pound system, a tongue weight of 900 pounds would be ideal. If... view full answer...
What you'd need is a 7-way adapter that has diodes built into the circuits which will absorb the small voltage spikes you are seeing with your Land Rover. For that you'd just need the part # C57003 and you'd be set. view full answer...
The Rhino-Rack Roof Mounted Steel Cargo Basket,part # RMCB02, will fit most factory crossbars.
You can take a couple of quick measurements to make sure the basket will work for your 2006 Land Rover LR3.
You will want to measure the size of your crossbars. If they measure 3-1/2 inches wide X 1-1/4 inch tall or smaller the # RMCB02 mounts will work just fine. The cargo basket requires the center-to-center spread of the crossbars is between 25 and 44 inches for this to work.
This basket... view full answer...
Yakima does not list the MegaWarrior # Y07080 as a fit but you can use the LoadWarrior # Y07070 or the LoadWarrior with extension, # Y07070-74, on the factory roof rack on the 2006 Land Rover LR3.
For a ladder you may be able to get # DZ760611 to fit though it is for a Toyota FJ Cruiser. The other potential option is # RRRFL which was designed for different roof mounted trays. But it wouldn't take much to get it to work with a cargo basket. view full answer...
Yes, the Curt Echo Mobile Trailer Brake Controller part # C51180 will work on a 40' long motorhome as it has a transmission distance of around 50'. However, this can vary depending on the bluetooth capability of your smartphone. In regards to the trailer brakes locking up, this is going to be caused by the brake output wire shorting out to another power source. The most common place for this to happen is inside the trailer connector so you will want to check this first to make sure there... view full answer...
For an all wheel drive vehicle like your 2006 Land Rover LR3 you will want to put tire chains (if only using one set) on the main drive wheels. Which in your case would be the rear axle.
Ideally you would want to put the chains on all four wheels for max traction, but for one axle the main one is the one to be used.
For both tire sizes we have for your vehicle (255/55-19 and 255/60-18) the Easy Fit Thule Chains part # TH04115265 that you referenced have been confirmed as a fit. You'll... view full answer...
Go To Results